Network Working Group K. Holtman
Request for Comments: 2295 TUE
Category: Experimental A. Mutz
Hewlett-Packard
March 1998
Transparent Content Negotiation in HTTP
Status of this Memo
This memo defines an Experimental Protocol for the Internet
community. It does not specify an Internet standard of any kind.
Discussion and suggestions for improvement are requested.
Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (1998). All Rights Reserved.
ABSTRACT
HTTP allows web site authors to put multiple versions of the same
information under a single URL. Transparent content negotiation is
an extensible negotiation mechanism, layered on top of HTTP, for
automatically selecting the best version when the URL is accessed.
This enables the smooth deployment of new web data formats and markup
tags.
TABLE OF CONTENTS
1 Introduction................................................4
1.1 Background................................................4
2 Terminology.................................................5
2.1 Terms from HTTP/1.1.......................................5
2.2 New terms.................................................6
3 Notation....................................................8
4 Overview....................................................9
4.1 Content negotiation.......................................9
4.2 HTTP/1.0 style negotiation scheme.........................9
4.3 Transparent content negotiation scheme...................10
4.4 Optimizing the negotiation process.......................12
4.5 Downwards compatibility with non-negotiating user agents.14
4.6 Retrieving a variant by hand.............................15
4.7 Dimensions of negotiation................................15
Holtman & Mutz Experimental [Page 1]
RFC 2295 Transparent Content Negotiation March 1998
4.8 Feature negotiation......................................15
4.9 Length of variant lists..................................16
4.10 Relation with other negotiation schemes.................16
5 Variant descriptions.......................................17
5.1 Syntax...................................................17
5.2 URI......................................................17
5.3 Source-quality...........................................18
5.4 Type, charset, language, and length......................19
5.5 Features.................................................19
5.6 Description..............................................19
5.7 Extension-attribute......................................20
6 Feature negotiation........................................20
6.1 Feature tags.............................................20
6.1.1 Feature tag values.....................................21
6.2 Feature sets.............................................21
6.3 Feature predicates.......................................22
6.4 Features attribute.......................................24
7 Remote variant selection algorithms........................25
7.1 Version numbers..........................................25
8 Content negotiation status codes and headers...............25
8.1 506 Variant Also Negotiates..............................25
8.2 Accept-Features..........................................26
8.3 Alternates...............................................27
8.4 Negotiate................................................28
8.5 TCN......................................................30
8.6 Variant-Vary.............................................30
9 Cache validators...........................................31
9.1 Variant list validators..................................31
9.2 Structured entity tags...................................31
9.3 Assigning entity tags to variants........................32
10 Content negotiation responses..............................32
10.1 List response...........................................33
10.2 Choice response.........................................34
10.3 Adhoc response..........................................37
10.4 Reusing the Alternates header...........................38
10.5 Extracting a normal response from a choice response.....39
10.6 Elaborate Vary headers..................................39
10.6.1 Construction of an elaborate Vary header..............40
10.6.2 Caching of an elaborate Vary header...................41
10.7 Adding an Expires header for HTTP/1.0 compatibility.....41
10.8 Negotiation on content encoding.........................41
Holtman & Mutz Experimental [Page 2]
RFC 2295 Transparent Content Negotiation March 1998
11 User agent support for transparent negotiation.............42
11.1 Handling of responses...................................42
11.2 Presentation of a transparently negotiated resource.....42
12 Origin server support for transparent negotiation..........43
12.1 Requirements............................................43
12.2 Negotiation on transactions other than GET and HEAD.....45
13 Proxy support for transparent negotiation..................45
14 Security and privacy considerations........................46
14.1 Accept- headers revealing personal information..........46
14.2 Spoofing of responses from variant resources............47
14.3 Security holes revealed by negotiation..................47
15 Internationalization considerations........................47
16 Acknowledgments............................................47
17 References.................................................48
18 Authors' Addresses.........................................48
19 Appendix: Example of a local variant selection algorithm...49
19.1 Computing overall quality values........................49
19.2 Determining the result..................................51
19.3 Ranking dimensions......................................51
20 Appendix: feature negotiation examples.....................52
20.1 Use of feature tags.....................................52
20.2 Use of numeric feature tags.............................53
20.3 Feature tag design......................................53
21 Appendix: origin server implementation considerations......54
21.1 Implementation with a CGI script........................54
21.2 Direct support by HTTP servers..........................55
21.3 Web publishing tools....................................55
22 Appendix: Example of choice response construction..........55
23 Full Copyright Statement...................................58
Holtman & Mutz Experimental [Page 3]
RFC 2295 Transparent Content Negotiation March 1998
1 Introduction
HTTP allows web site authors to put multiple versions of the same
information under a single URI. Each of these versions is called a
`variant'. Transparent content negotiation is an extensible
negotiation mechanism for automatically and efficiently retrieving
the best variant when a GET or HEAD request is made. This enables
the smooth deployment of new web data formats and markup tags.
This specification defines transparent content negotiation as an
extension on top of the HTTP/1.1 protocol [1]. However, use of this
extension does not require use of HTTP/1.1: transparent content
negotiation can also be done if some or all of the parties are
HTTP/1.0 [2] systems.
Transparent content negotiation is called `transparent' because it
makes all variants which exist inside the origin server visible to
outside parties.
Note: Some members of the IETF are currently undertaking a number
of activities which are loosely related to this experimental
protocol. First, there is an effort to define a protocol-
independent registry for feature tags. The intention is that this
experimental protocol will be one of the clients of the registry.
Second, some research is being done on content negotiation systems
for other transport protocols (like internet mail and internet fax)
and on generalized negotiation systems for multiple transport
protocols. At the time of writing, it is unclear if or when this
research will lead to results in the form of complete negotiation
system specifications. It is also unclear to which extent possible
future specifications can or will re-use elements of this
experimental protocol.
1.1 Background
The addition of content negotiation to the web infrastructure has
been considered important since the early days of the web. Among the
expected benefits of a sufficiently powerful system for content
negotiation are
* smooth deployment of new data formats and markup tags will
allow graceful evolution of the web
* eliminating the need to choose between a `state of the art
multimedia homepage' and one which can be viewed by all web users
* enabling good service to a wider range of browsing
platforms (from low-end PDA's to high-end VR setups)
Holtman & Mutz Experimental [Page 4]
RFC 2295 Transparent Content Negotiation March 1998
* eliminating error-prone and cache-unfriendly
User-Agent based negotiation
* enabling construction of sites without `click here for the X
version' links
* internationalization, and the ability to offer multi-lingual
content without a bias towards one language.
2 Terminology
The words "MUST", "MUST NOT", "SHOULD", "SHOULD NOT", and "MAY" in
this document are to be interpreted as described in RFC 2119 [4].
This specification uses the term `header' as an abbreviation for for
`header field in a request or response message'.
2.1 Terms from HTTP/1.1
This specification mostly uses the terminology of the HTTP/1.1
specification [1]. For the convenience of the reader, this section
reproduces some key terminology definition from [1].
request
An HTTP request message.
response
An HTTP response message.
resource
A network data object or service that can be identified by a URI.
Resources may be available in multiple representations (e.g.
multiple languages, data formats, size, resolutions) or vary in
other ways.
content negotiation
The mechanism for selecting the appropriate representation when
servicing a request.
client
A program that establishes connections for the purpose of sending
requests.
user agent
The client which initiates a request. These are often browsers,
editors, spiders (web-traversing robots), or other end user tools.
Holtman & Mutz Experimental [Page 5]
RFC 2295 Transparent Content Negotiation March 1998
server
An application program that accepts connections in order to service
requests by sending back responses. Any given program may be
capable of being both a client and a server; our use of these terms
refers only to the role being performed by the program for a
particular connection, rather than to the program's capabilities in
general. Likewise, any server may act as an origin server, proxy,
gateway, or tunnel, switching behavior based on the nature of each
request.
origin server
The server on which a given resource resides or is to be created.
proxy
An intermediary program which acts as both a server and a client
for the purpose of making requests on behalf of other clients.
Requests are serviced internally or by passing them on, with
possible translation, to other servers. A proxy must implement
both the client and server requirements of this specification.
age
The age of a response is the time since it was sent by, or
successfully validated with, the origin server.
fresh
A response is fresh if its age has not yet exceeded its freshness
lifetime.
2.2 New terms
transparently negotiable resource
A resource, identified by a single URI, which has multiple
representations (variants) associated with it. When servicing a
request on its URI, it allows selection of the best representation
using the transparent content negotiation mechanism. A
transparently negotiable resource always has a variant list bound
to it, which can be represented as an Alternates header (defined in
section 8.3).
variant list
A list containing variant descriptions, which can be bound to a
transparently negotiable resource.
Holtman & Mutz Experimental [Page 6]
RFC 2295 Transparent Content Negotiation March 1998
variant description
A machine-readable description of a variant resource, usually found
in a variant list. A variant description contains the variant
resource URI and various attributes which describe properties of
the variant. Variant descriptions are defined in section 5.
variant resource
A resource from which a variant of a negotiable resource can be
retrieved with a normal HTTP/1.x GET request, i.e. a GET request
which does not use transparent content negotiation.
neighboring variant
A variant resource is called a neighboring variant resource of some
transparently negotiable HTTP resource if the variant resource has
a HTTP URL, and if the absolute URL of the variant resource up to
its last slash equals the absolute URL of the negotiable resource
up to its last slash, where equality is determined with the URI
comparison rules in section 3.2.3 of [1]. The property of being a
neighboring variant is important because of security considerations
(section 14.2). Not all variants of a negotiable resource need to
be neighboring variants. However, access to neighboring variants
can be more highly optimized by the use of remote variant selection
algorithms (section 7) and choice responses (section 10.2).
remote variant selection algorithm
A standardized algorithm by which a server can sometimes choose a
best variant on behalf of a negotiating user agent. The algorithm
typically computes whether the Accept- headers in the request
contain sufficient information to allow a choice, and if so, which
variant is the best variant. The use of a remote algorithm can
speed up the negotiation process.
list response
A list response returns the variant list of the negotiable
resource, but no variant data. It can be generated when the server
does not want to, or is not allowed to, return a particular best
variant for the request. List responses are defined in section
10.1.
choice response
A choice response returns a representation of the best variant for
the request, and may also return the variant list of the negotiable
resource. It can be generated when the server has sufficient
information to be able to choose the best variant on behalf the
user agent, but may only be generated if this best variant is a
neighboring variant. Choice responses are defined in section 10.2.
Holtman & Mutz Experimental [Page 7]
RFC 2295 Transparent Content Negotiation March 1998
adhoc response
An adhoc response can be sent by an origin server as an extreme
measure, to achieve compatibility with a non-negotiating or buggy
client if this compatibility cannot be achieved by sending a list
or choice response. There are very little requirements on the
contents of an adhoc response. Adhoc responses are defined in
section 10.3.
Accept- headers
The request headers: Accept, Accept-Charset, Accept-Language, and
Accept-Features.
supports transparent content negotiation
From the viewpoint of an origin server or proxy, a user agent
supports transparent content negotiation if and only if it sends a
Negotiate header (section 8.4) which indicates such support.
server-side override
If a request on a transparently negotiated resource is made by a
client which supports transparent content negotiation, an origin
server is said to perform a server-side override if the server
ignores the directives in the Negotiate request header, and instead
uses a custom algorithm to choose an appropriate response. A
server-side override can sometimes be used to work around known
client bugs. It could also be used by protocol extensions on top
of transparent content negotiation.
3 Notation
The version of BNF used in this document is taken from [1], and many
of the nonterminals used are defined in [1]. Note that the
underlying charset is US-ASCII.
One new BNF construct is added:
1%rule
stands for one or more instances of "rule", separated by whitespace:
1%rule = rule *( 1*LWS rule )
This specification also introduces
number = 1*DIGIT
short-float = 1*3DIGIT [ "." 0*3DIGIT ]
Holtman & Mutz Experimental [Page 8]
RFC 2295 Transparent Content Negotiation March 1998
This specification uses the same conventions as in [1] (see section
1.2 of [1]) for defining the significance of each particular
requirement.
4 Overview
This section gives an overview of transparent content negotiation.
It starts with a more general discussion of negotiation as provided
by HTTP.
4.1 Content negotiation
HTTP/1.1 allows web site authors to put multiple versions of the same
information under a single resource URI. Each of these versions is
called a `variant'. For example, a resource http://x.org/paper could
bind to three different variants of a paper:
1. HTML, English
2. HTML, French
3. Postscript, English
Content negotiation is the process by which the best variant is
selected if the resource is accessed. The selection is done by
matching the properties of the available variants to the capabilities
of the user agent and the preferences of the user.
It has always been possible under HTTP to have multiple
representations available for one resource, and to return the most
appropriate representation for each subsequent request. However,
HTTP/1.1 is the first version of HTTP which has provisions for doing
this in a cache-friendly way. These provisions include the Vary
response header, entity tags, and the If-None-Match request header.
4.2 HTTP/1.0 style negotiation scheme
The HTTP/1.0 protocol elements allow for a negotiation scheme as
follows:
Server _____ proxy _____ proxy _____ user
x.org cache cache agent
< ----------------------------------
| GET http://x.org/paper
| Accept- headers
choose
|
---------------------------------- >
Best variant
Holtman & Mutz Experimental [Page 9]
RFC 2295 Transparent Content Negotiation March 1998
When the resource is accessed, the user agent sends (along with its
request) various Accept- headers which express the user agent
capabilities and the user preferences. Then the origin server uses
these Accept- headers to choose the best variant, which is returned
in the response.
The biggest problem with this scheme is that it does not scale well.
For all but the most minimal user agents, Accept- headers expressing
all capabilities and preferences would be very large, and sending
them in every request would be hugely inefficient, in particular
because only a small fraction of the resources on the web have
multiple variants.
4.3 Transparent content negotiation scheme
The transparent content negotiation scheme eliminates the need to
send huge Accept- headers, and nevertheless allows for a selection
process that always yields either the best variant, or an error
message indicating that user agent is not capable of displaying any
of the available variants.
Under the transparent content negotiation scheme, the server sends a
list with the available variants and their properties to the user
agent. An example of a list with three variants is
{"paper.1" 0.9 {type text/html} {language en}},
{"paper.2" 0.7 {type text/html} {language fr}},
{"paper.3" 1.0 {type application/postscript} {language en}}
The syntax and semantics of the variant descriptions in this list are
covered in section 5. When the list is received, the user agent can
choose the best variant and retrieve it. Graphically, the
communication can be represented as follows:
Holtman & Mutz Experimental [Page 10]
RFC 2295 Transparent Content Negotiation March 1998
Server _____ proxy _____ proxy _____ user
x.org cache cache agent
< ----------------------------------
| GET http://x.org/paper
|
----------------------------------- > [list response]
return of list |
choose
|
< ----------------------------------
| GET http://x.org/paper.1
|
---------------------------------- > [normal response]
return of paper.1
The first response returning the list of variants is called a `list
response'. The second response is a normal HTTP response: it does
not contain special content negotiation related information. Only
the user agent needs to know that the second request actually
retrieves a variant. For the other parties in the communication, the
second transaction is indistinguishable from a normal HTTP
transaction.
With this scheme, information about capabilities and preferences is
only used by the user agent itself. Therefore, sending such
information in large Accept- headers is unnecessary. Accept- headers
do have a limited use in transparent content negotiation however; the
sending of small Accept- headers can often speed up the negotiation
process. This is covered in section 4.4.
List responses are covered in section 10.1. As an example, the list
response in the above picture could be:
HTTP/1.1 300 Multiple Choices
Date: Tue, 11 Jun 1996 20:02:21 GMT
TCN: list
Alternates: {"paper.1" 0.9 {type text/html} {language en}},
{"paper.2" 0.7 {type text/html} {language fr}},
{"paper.3" 1.0 {type application/postscript}
{language en}}
Vary: negotiate, accept, accept-language
ETag: "blah;1234"
Cache-control: max-age=86400
Content-Type: text/html
Content-Length: 227
Multiple Choices:
The Alternates header in the response contains the variant list. The
Vary header is included to ensure correct caching by plain HTTP/1.1
caches (see section 10.6). The ETag header allows the response to be
revalidated by caches, the Cache-Control header controls this
revalidation. The HTML entity included in the response allows the
user to select the best variant by hand if desired.
4.4 Optimizing the negotiation process
The basic transparent negotiation scheme involves two HTTP
transactions: one to retrieve the list, and a second one to retrieve
the chosen variant. There are however several ways to `cut corners'
in the data flow path of the basic scheme.
First, caching proxies can cache both variant lists and variants.
Such caching can reduce the communication overhead, as shown in the
following example:
Server _____ proxy _____ proxy __________ user
x.org cache cache agent
< --------------
| GET ../paper
|
has the list
in cache
|
------------- > [list response]
list |
|
choose
|
< --------------------------
| GET ../paper.1
|
has the variant
in cache
|
-------------------------- > [normal response]
return of paper.1
Holtman & Mutz Experimental [Page 12]
RFC 2295 Transparent Content Negotiation March 1998
Second, the user agent can send small Accept- headers, which may
contain enough information to allow the server to choose the best
variant and return it directly.
Server _____ proxy _____ proxy _____ user
x.org cache cache agent
< ----------------------------------
| GET http://x.org/paper
| small Accept- headers
|
able to choose on
behalf of user agent
|
---------------------------------- > [choice response]
return of paper.1 and list
This choosing based on small Accept- headers is done with a `remote
variant selection algorithm'. Such an algorithm takes the variant
list and the Accept- headers as input. It then computes whether the
Accept- headers contain sufficient information to choose on behalf of
the user agent, and if so, which variant is the best variant. If the
best variant is a neighboring variant, it may be returned, together
with the variant list, in a choice response.
A server may only choose on behalf of a user agent supporting
transparent content negotiation if the user agent explicitly allows
the use of a particular remote variant selection algorithm in the
Negotiate request header. User agents with sophisticated internal
variant selection algorithms may want to disallow a remote choice, or
may want to allow it only when retrieving inline images. If the
local algorithm of the user agent is superior in only some difficult
areas of negotiation, it is possible to enable the remote algorithm
for the easy areas only. More information about the use of a remote
variant selection algorithm can be found in [3].
Choice responses are covered in section 10.2. For example, the
choice response in the above picture could be:
HTTP/1.1 200 OK
Date: Tue, 11 Jun 1996 20:05:31 GMT
TCN: choice
Content-Type: text/html
Last-Modified: Mon, 10 Jun 1996 10:01:14 GMT
Content-Length: 5327
Cache-control: max-age=604800
Content-Location: paper.1
Alternates: {"paper.1" 0.9 {type text/html} {language en}},
Holtman & Mutz Experimental [Page 13]
RFC 2295 Transparent Content Negotiation March 1998
{"paper.2" 0.7 {type text/html} {language fr}},
{"paper.3" 1.0 {type application/postscript}
{language en}}
Etag: "gonkyyyy;1234"
Vary: negotiate, accept, accept-language
Expires: Thu, 01 Jan 1980 00:00:00 GMT
A paper about ....
Finally, the above two kinds of optimization can be combined; a
caching proxy which has the list will sometimes be able to choose on
behalf of the user agent. This could lead to the following
communication pattern:
Server _____ proxy _____ proxy __________ user
x.org cache cache agent
< ---------------
| GET ../paper
| small Accept
|
able to choose
on behalf
|
< ----------
| GET ../paper.1
|
---------- > [normal response]
paper.1 |
---------------- > [choice response]
paper.1 and list
Note that this cutting of corners not only saves bandwidth, it also
eliminates delays due to packet round trip times, and reduces the
load on the origin server.
4.5 Downwards compatibility with non-negotiating user agents
To handle requests from user agents which do not support transparent
content negotiation, this specification allows the origin server to
revert to a HTTP/1.0 style negotiation scheme. The specification of
heuristics for such schemes is beyond the scope of this document.
Holtman & Mutz Experimental [Page 14]
RFC 2295 Transparent Content Negotiation March 1998
4.6 Retrieving a variant by hand
It is always possible for a user agent to retrieve the variant list
which is bound to a negotiable resource. The user agent can use this
list to make available a menu of all variants and their
characteristics to the user. Such a menu allows the user to randomly
browse other variants, and makes it possible to manually correct any
sub-optimal choice made by the automatic negotiation process.
4.7 Dimensions of negotiation
Transparent content negotiation defines four dimensions of
negotiation:
1. Media type (MIME type)
2. Charset
3. Language
4. Features
The first three dimensions have traditionally been present in HTTP.
The fourth dimension is added by this specification. Additional
dimensions, beyond the four mentioned above, could be added by future
specifications.
Negotiation on the content encoding of a response (gzipped,
compressed, etc.) is left outside of the realm of transparent
negotiation. See section 10.8 for more information.
4.8 Feature negotiation
Feature negotiation intends to provide for all areas of negotiation
not covered by the type, charset, and language dimensions. Examples
are negotiation on
* HTML extensions
* Extensions of other media types
* Color capabilities of the user agent
* Screen size
* Output medium (screen, paper, ...)
* Preference for speed vs. preference for graphical detail
The feature negotiation framework (section 6) is the principal means
by which transparent negotiation offers extensibility; a new
dimension of negotiation (really a sub-dimension of the feature
dimension) can be added without the need for a new standards effort
by the simple registration of a `feature tag'.
Holtman & Mutz Experimental [Page 15]
RFC 2295 Transparent Content Negotiation March 1998
4.9 Length of variant lists
As a general rule, variant lists should be short: it is expected that
a typical transparently negotiable resource will have 2 to 10
variants, depending on its purpose. Variant lists should be short
for a number of reasons:
1. The user must be able to pick a variant by hand to correct a
bad automatic choice, and this is more difficult with a long
variant list.
2. A large number of variants will decrease the efficiency of
internet proxy caches.
3. Long variant lists will make some transparently negotiated
responses longer.
In general, it is not desirable to create a transparently negotiable
resource with hundreds of variants in order to fine-tune the
graphical presentation of a resource. Any graphical fine-tuning
should be done, as much as possible, by using constructs which act at
the user agent side, for example
In order to promote user agent side fine tuning, which is more
scalable than fine tuning over the network, user agents which
implement a scripting language for content rendering are encouraged
to make the availability of this language visible for transparent
content negotiation, and to allow rendering scripts to access the
capabilities and preferences data used for content negotiation, as
far as privacy considerations permit this.
4.10 Relation with other negotiation schemes
The HTTP/1.x protocol suite allows for many different negotiation
mechanisms. Transparent content negotiation specializes in scalable,
interoperable negotiation of content representations at the HTTP
level. It is intended that transparent negotiation can co-exist with
other negotiation schemes, both open and proprietary, which cover
different application domains or work at different points in the
author-to-user chain. Ultimately, it will be up to the resource
author to decide which negotiation mechanism, or combination of
negotiation mechanisms, is most appropriate for the task at hand.
Holtman & Mutz Experimental [Page 16]
RFC 2295 Transparent Content Negotiation March 1998
5 Variant descriptions
5.1 Syntax
A variant can be described in a machine-readable way with a variant
description.
variant-description =
"{" <"> URI <"> source-quality *variant-attribute"}"
source-quality = qvalue
variant-attribute = "{" "type" media-type "}"
| "{" "charset" charset "}"
| "{" "language" 1#language-tag "}"
| "{" "length" 1*DIGIT "}"
| "{" "features" feature-list "}"
| "{" "description"
quoted-string [ language-tag ] "}"
| extension-attribute
extension-attribute = "{" extension-name extension-value "}"
extension-name = token
extension-value = *( token | quoted-string | LWS
| extension-specials )
extension-specials =
and "}">
The feature-list syntax is defined in section 6.4.
Examples are
{"paper.2" 0.7 {type text/html} {language fr}}
{"paper.5" 0.9 {type text/html} {features tables}}
{"paper.1" 0.001}
The various attributes which can be present in a variant description
are covered in the subsections below. Each attribute may appear only
once in a variant description.
5.2 URI
The URI attribute gives the URI of the resource from which the
variant can be retrieved with a GET request. It can be absolute or
relative to the Request-URI. The variant resource may vary (on the
Holtman & Mutz Experimental [Page 17]
RFC 2295 Transparent Content Negotiation March 1998
Cookie request header, for example), but MUST NOT engage in
transparent content negotiation itself.
5.3 Source-quality
The source-quality attribute gives the quality of the variant, as a
representation of the negotiable resource, when this variant is
rendered with a perfect rendering engine on the best possible output
medium.
If the source-quality is less than 1, it often expresses a quality
degradation caused by a lossy conversion to a particular data format.
For example, a picture originally in JPEG form would have a lower
source quality when translated to the XBM format, and a much lower
source quality when translated to an ASCII-art variant. Note
however, that degradation is a function of the source; an original
piece of ASCII-art may degrade in quality if it is captured in JPEG
form.
The source-quality could also represent a level of quality caused by
skill of language translation, or ability of the used media type to
capture the intended artistic expression.
Servers should use the following table a guide when assigning source
quality values:
1.000 perfect representation
0.900 threshold of noticeable loss of quality
0.800 noticeable, but acceptable quality reduction
0.500 barely acceptable quality
0.300 severely degraded quality
0.000 completely degraded quality
The same table can be used by local variant selection algorithms (see
appendix 19) when assigning degradation factors for different content
rendering mechanisms. Note that most meaningful values in this table
are close to 1. This is due to the fact that quality factors are
generally combined by multiplying them, not by adding them.
When assigning source-quality values, servers should not account for
the size of the variant and its impact on transmission and rendering
delays; the size of the variant should be stated in the length
attribute and any size-dependent calculations should be done by the
variant selection algorithm. Any constant rendering delay for a
particular media type (for example due to the startup time of a
helper application) should be accounted for by the user agent, when
assigning a quality factor to that media type.
Holtman & Mutz Experimental [Page 18]
RFC 2295 Transparent Content Negotiation March 1998
5.4 Type, charset, language, and length
The type attribute of a variant description carries the same
information as its Content-Type response header counterpart defined
in [1], except for any charset information, which MUST be carried in
the charset attribute. For, example, the header
Content-Type: text/html; charset=ISO-8859-4
has the counterpart attributes
{type text/html} {charset ISO-8859-4}
The language and length attributes carry the same information as
their Content-* response header counterparts in [1]. The length
attribute, if present, MUST thus reflect the length of the variant
alone, and not the total size of the variant and any objects inlined
or embedded by the variant.
Though all of these attributes are optional, it is often desirable to
include as many attributes as possible, as this will increase the
quality of the negotiation process.
Note: A server is not required to maintain a one-to-one
correspondence between the attributes in the variant description
and the Content-* headers in the variant response. For example,
if the variant description contains a language attribute, the
response does not necessarily have to contain a Content-Language
header. If a Content-Language header is present, it does not have
to contain an exact copy of the information in the language
attribute.
5.5 Features
The features attribute specifies how the presence or absence of
particular feature tags in the user agent affects the overall quality
of the variant. This attribute is covered in section 6.4.
5.6 Description
The description attribute gives a textual description of the variant.
It can be included if the URI and normal attributes of a variant are
considered too opaque to allow interpretation by the user. If a user
agent is showing a menu of available variants compiled from a variant
list, and if a variant has a description attribute, the user agent
SHOULD show the description attribute of the variant instead of
showing the normal attributes of the variant. The description field
uses the UTF-8 character encoding scheme [5], which is a superset of
Holtman & Mutz Experimental [Page 19]
RFC 2295 Transparent Content Negotiation March 1998
US-ASCII, with ""%" HEX HEX" encoding. The optional language tag MAY
be used to specify the language used in the description text.
5.7 Extension-attribute
The extension-attribute allows future specifications to incrementally
define dimensions of negotiation which cannot be created by using the
feature negotiation framework, and eases content negotiation
experiments. In experimental situations, servers MUST ONLY generate
extension-attributes whose names start with "x-". User agents SHOULD
ignore all extension attributes they do not recognize. Proxies MUST
NOT run a remote variant selection algorithm if an unknown extension
attribute is present in the variant list.
6 Feature negotiation
This section defines the feature negotiation mechanism. Feature
negotiation has been introduced in section 4.8. Appendix 19 contains
examples of feature negotiation.
6.1 Feature tags
A feature tag (ftag) identifies something which can be negotiated on,
for example a property (feature) of a representation, a capability
(feature) of a user agent, or the preference of a user for a
particular type of representation. The use of feature tags need not
be limited to transparent content negotiation, and not every feature
tag needs to be usable in the HTTP transparent content negotiation
framework.
ftag = token | quoted-string
Note: A protocol-independent system for feature tag registration
is currently being developed in the IETF. This specification does
not define any feature tags. In experimental situations, the use
of tags which start with "x." is encouraged.
Feature tags are used in feature sets (section 6.2) and in feature
predicates (section 6.3). Feature predicates are in turn used in
features attributes (section 6.4), which are used in variant
descriptions (section 5). Variant descriptions can be transmitted in
Alternates headers (section 8.3).
The US-ASCII charset is used for feature tags. Feature tag
comparison is case-insensitive. A token tag XYZ is equal to a
quoted-string tag "XYZ". Examples are
tables, fonts, blebber, wolx, screenwidth, colordepth
Holtman & Mutz Experimental [Page 20]
RFC 2295 Transparent Content Negotiation March 1998
An example of the use of feature tags in a variant description is:
{"index.html" 1.0 {type text/html} {features tables frames}}
This specification follows general computing practice in that it
places no restrictions on what may be called a feature. At the
protocol level, this specification does not distinguish between
different uses of feature tags: a tag will be processed in the same
way, no matter whether it identifies a property, capability, or
preference. For some tags, it may be fluid whether the tag
represents a property, preference, or capability. For example, in
content negotiation on web pages, a "textonly" tag would identify a
capability of a text-only user agent, but the user of a graphical
user agent may use this tag to specify that text-only content is
preferred over graphical content.
6.1.1 Feature tag values
The definition of a feature tag may state that a feature tag can have
zero, one, or more values associated with it. These values
specialize the meaning of the tag. For example, a feature tag
`paper' could be associated with the values `A4' and `A5'.
tag-value = token | quoted-string
The US-ASCII charset is used for feature tag values. Equality
comparison for tag values MUST be done with a case-sensitive, octet-
by-octet comparison, where any ""%" HEX HEX" encodings MUST be
processed as in [1]. A token value XYZ is equal to a quoted-string
value "XYZ".
6.2 Feature sets
The feature set of a user agent is a data structure which records the
capabilities of the user agent and the preferences of the user.
Feature sets are used by local variant selection algorithms (see
appendix 19 for an example). A user agent can use the Accept-
Features header (section 8.2) to make some of the contents of its
feature set known to remote variant selection algorithms.
Structurally, a feature set is a possibly empty set, containing
records of the form
( feature tag , set of feature tag values )
Holtman & Mutz Experimental [Page 21]
RFC 2295 Transparent Content Negotiation March 1998
If a record with a feature tag is present in the set, this means that
the user agent implements the corresponding capability, or that the
user has expressed the corresponding preference.
Each record in a feature set has a, possibly empty, set of tag
values. For feature tags which cannot have values associated with
it, this set is always empty. For feature tags which can have zero,
one, or more values associated with it, this set contains those
values currently associated with the tag. If the set of a feature
tag T has the value V in it, it is said that `the tag T is present
with the value V'.
This specification does not define a standard notation for feature
sets. An example of a very small feature set, in a mathematical
notation, is
{ ( "frames" , { } ) ,
( "paper" , { "A4" , "A5" } )
}
As feature registration is expected to be an ongoing process, it is
generally not possible for a user agent to know the meaning of all
feature tags it can possibly encounter in a variant description. A
user agent SHOULD treat all features tags unknown to it as absent
from its feature set.
A user agent may change the contents of its feature set depending on
the type of request, and may also update it to reflect changing
conditions, for example a change in the window size. Therefore, when
considering feature negotiation, one usually talks about `the feature
set of the current request'.
6.3 Feature predicates
Feature predicates are predicates on the contents of feature sets.
They appear in the features attribute of a variant description.
fpred = [ "!" ] ftag
| ftag ( "=" | "!=" ) tag-value
| ftag "=" "[" numeric-range "]"
numeric-range = [ number ] "-" [ number ]
Feature predicates are used in features attributes (section 6.4),
which are used in variant descriptions (section 5). Variant
descriptions can be transmitted in Alternates headers (section 8.3).
Holtman & Mutz Experimental [Page 22]
RFC 2295 Transparent Content Negotiation March 1998
Examples of feature predicates are
blebber, !blebber, paper=a4, colordepth=5, blex!=54,
dpi=[300-599], colordepth=[24-]
Using the feature set of the current request, a user agent SHOULD
compute the truth value of the different feature predicates as
follows.
ftag true if the feature is present, false otherwise
!ftag true if the feature is absent, false otherwise
ftag=V true if the feature is present with the value V,
false otherwise,
ftag!=V true if the feature is not present with the value V,
false otherwise,
ftag=[N-M] true if the feature is present with at least one
numeric value, while the highest value with which it
is present in the range N-M, false otherwise. If N
is missing, the lower bound is 0. If M is missing,
the upper bound is infinity.
As an example, with the feature set
{ ( "blex" , { } ),
( "colordepth" , { "5" } ),
( "UA-media" , { "stationary" } ),
( "paper" , { "A4", "A3" } ) ,
( "x-version" , { "104", "200" } )
}
the following predicates are true:
blex, colordepth=[4-], colordepth!=6, colordepth, !screenwidth, UA-
media=stationary, UA-media!=screen, paper=A4, paper =!A0,
colordepth=[ 4 - 6 ], x-version=[100-300], x-version=[200-300]
and the following predicates are false:
!blex, blebber, colordepth=6, colordepth=foo, !colordepth,
screenwidth, screenwidth=640, screenwidth!=640, x-version=99, UA-
media=screen, paper=A0, paper=a4, x-version=[100-199], wuxta
Holtman & Mutz Experimental [Page 23]
RFC 2295 Transparent Content Negotiation March 1998
6.4 Features attribute
The features attribute, for which section 5.1 defines the syntax
"{" "features" feature-list "}"
is used in a variant description to specify how the presence or
absence of particular feature tags in the user agent affects the
overall quality of the variant.
feature-list = 1%feature-list-element
feature-list-element = ( fpred | fpred-bag )
[ ";" [ "+" true-improvement ]
[ "-" false-degradation ]
]
fpred-bag = "[" 1%fpred "]"
true-improvement = short-float
false-degradation = short-float
Features attributes are used in variant descriptions (section 5).
Variant descriptions can be transmitted in Alternates headers
(section 8.3).
Examples are:
{features !textonly [blebber !wolx] colordepth=3;+0.7}
{features !blink;-0.5 background;+1.5 [blebber !wolx];+1.4-0.8}
The default value for the true-improvement is 1. The default value
for the false-degradation is 0, or 1 if a true-improvement value is
given.
A user agent SHOULD, and a remote variant selection algorithm MUST
compute the quality degradation factor associated with the features
attribute by multiplying all quality degradation factors of the
elements of the feature-list. Note that the result can be a factor
greater than 1.
A feature list element yields its true-improvement factor if the
corresponding feature predicate is true, or if at least one element
of the corresponding fpred-bag is true. The element yields its
false-degradation factor otherwise.
Holtman & Mutz Experimental [Page 24]
RFC 2295 Transparent Content Negotiation March 1998
7 Remote variant selection algorithms
A remote variant selection algorithm is a standardized algorithm by
which a server can choose a best variant on behalf of a negotiating
user agent. The use of a remote algorithm can speed up the
negotiation process by eliminating a request-response round trip.
A remote algorithm typically computes whether the Accept- headers in
the request contain sufficient information to allow a choice, and if
so, which variant is the best variant. This specification does not
define any remote algorithms, but does define a mechanism to
negotiate on the use of such algorithms.
7.1 Version numbers
A version numbering scheme is used to distinguish between different
remote variant selection algorithms.
rvsa-version = major "." minor
major = 1*4DIGIT
minor = 1*4DIGIT
An algorithm with the version number X.Y, with Y>0, MUST be downwards
compatible with all algorithms from X.0 up to X.Y. Downwards
compatibility means that, if supplied with the same information, the
newer algorithm MUST make the same choice, or a better choice, as the
old algorithm. There are no compatibility requirements between
algorithms with different major version numbers.
8 Content negotiation status codes and headers
This specification adds one new HTTP status code, and introduces six
new HTTP headers. It also extends the semantics of an existing
HTTP/1.1 header.
8.1 506 Variant Also Negotiates
The 506 status code indicates that the server has an internal
configuration error: the chosen variant resource is configured to
engage in transparent content negotiation itself, and is therefore
not a proper end point in the negotiation process.
Holtman & Mutz Experimental [Page 25]
RFC 2295 Transparent Content Negotiation March 1998
8.2 Accept-Features
The Accept-Features request header can be used by a user agent to
give information about the presence or absence of certain features in
the feature set of the current request. Servers can use this
information when running a remote variant selection algorithm.
Note: the name `Accept-Features' for this header was chosen
because of symmetry considerations with other Accept- headers,
even though the Accept-Features header will generally not contain
an exhaustive list of features which are somehow `accepted'. A
more accurate name of this header would have been `Feature-Set-
Info'.
Accept-Features = "Accept-Features" ":"
#( feature-expr *( ";" feature-extension ) )
feature-expr = [ "!" ] ftag
| ftag ( "=" | "!=" ) tag-value
| ftag "=" "{" tag-value "}"
| "*"
feature-extension = token [ "=" ( token | quoted-string ) ]
No feature extensions are defined in this specification. An example
is:
Accept-Features: blex, !blebber, colordepth={5}, !screenwidth,
paper = A4, paper!="A2", x-version=104, *
The different feature expressions have the following meaning:
ftag ftag is present
!ftag ftag is absent
ftag=V ftag is present with the value V
ftag!=V ftag is present, but not with the value V
ftag={V} ftag is present with the value V, and not with any
other values
* the expressions in this header do not fully describe
the feature set: feature tags not mentioned in this
header may also be present, and, except for the case
ftag={V}, tags may be present with more values than
mentioned.
Holtman & Mutz Experimental [Page 26]
RFC 2295 Transparent Content Negotiation March 1998
Absence of the Accept-Features header in a request is equivalent to
the inclusion of
Accept-Features: *
By using the Accept-Features header, a remote variant selection
algorithm can sometimes determine the truth value of a feature
predicate on behalf of the user agent. For example, with the header
Accept-Features: blex, !blebber, colordepth={5}, !screenwidth,
paper = A4, paper!="A2", x-version=104, *
the algorithm can determine that the following predicates are true:
blex, colordepth=[4-], colordepth!=6, colordepth, !screenwidth,
paper=A4, colordepth=[4-6]
and that the following predicates are false:
!blex, blebber, colordepth=6, colordepth=foo, !colordepth,
screenwidth, screenwidth=640, screenwidth!=640,
but the truth value of the following predicates cannot be
determined:
UA-media=stationary, UA-media!=screen, paper!=a0,
x-version=[100-300], x-version=[200-300], x-version=99,
UA-media=screen, paper=A0, paper=a4, x-version=[100-199], wuxta
8.3 Alternates
The Alternates response header is used to convey the list of variants
bound to a negotiable resource. This list can also include
directives for any content negotiation process. If a response from a
transparently negotiable resource includes an Alternates header, this
header MUST contain the complete variant list bound to the negotiable
resource. Responses from resources which do not support transparent
content negotiation MAY also use Alternates headers.
Alternates = "Alternates" ":" variant-list
variant-list = 1#( variant-description
| fallback-variant
| list-directive )
fallback-variant = "{" <"> URI <"> "}"
list-directive = ( "proxy-rvsa" "=" <"> 0#rvsa-version <"> )
Holtman & Mutz Experimental [Page 27]
RFC 2295 Transparent Content Negotiation March 1998
| extension-list-directive
extension-list-directive =
token [ "=" ( token | quoted-string ) ]
An example is
Alternates: {"paper.1" 0.9 {type text/html} {language en}},
{"paper.2" 0.7 {type text/html} {language fr}},
{"paper.3" 1.0 {type application/postscript}
{language en}},
proxy-rvsa="1.0, 2.5"
Any relative URI specified in a variant-description or fallback-
variant field is relative to the request-URI. Only one fallback-
variant field may be present. If the variant selection algorithm of
the user agent finds that all described variants are unacceptable,
then it SHOULD choose the fallback variant, if present, as the best
variant. If the user agent computes the overall quality values of
the described variants, and finds that several variants share the
highest value, then the first variant with this value in the list
SHOULD be chosen as the best variant.
The proxy-rvsa directive restricts the use of remote variant
selection algorithms by proxies. If present, a proxy MUST ONLY use
algorithms which have one of the version numbers listed, or have the
same major version number and a higher minor version number as one of
the versions listed. Any restrictions set by proxy-rvsa come on top
of the restrictions set by the user agent in the Negotiate request
header. The directive proxy-rvsa="" will disable variant selection
by proxies entirely. Clients SHOULD ignore all extension-list-
directives they do not understand.
A variant list may contain multiple differing descriptions of the
same variant. This can be convenient if the variant uses conditional
rendering constructs, or if the variant resource returns multiple
representations using a multipart media type.
8.4 Negotiate
The Negotiate request header can contain directives for any content
negotiation process initiated by the request.
Negotiate = "Negotiate" ":" 1#negotiate-directive
negotiate-directive = "trans"
| "vlist"
| "guess-small"
Holtman & Mutz Experimental [Page 28]
RFC 2295 Transparent Content Negotiation March 1998
| rvsa-version
| "*"
| negotiate-extension
negotiate-extension = token [ "=" token ]
Examples are
Negotiate: 1.0, 2.5
Negotiate: *
The negotiate directives have the following meaning
"trans"
The user agent supports transparent content negotiation for
the current request.
"vlist"
The user agent requests that any transparently negotiated
response for the current request includes an Alternates
header with the variant list bound to the negotiable resource.
Implies "trans".
"guess-small"
The user agent allows origin servers to run a custom algorithm
which guesses the best variant for the request, and to return
this variant in a choice response, if the resulting choice
response is smaller than or not much larger than a list
response. The definition of `not much larger' is left to
origin server heuristics. Implies "vlist" and "trans".
rvsa-version
The user agent allows origin servers and proxies to run the
remote variant selection algorithm with the indicated version
number, or with the same major version number and a higher
minor version number. If the algorithm has sufficient
information to choose a best, neighboring variant, the origin
server or proxy MAY return a choice response with this
variant. Implies "trans".
"*"
The user agent allows origin servers and proxies to run any
remote variant selection algorithm. The origin server may
even run algorithms which have not been standardized. If the
algorithm has sufficient information to choose a best,
neighboring variant, the origin server or proxy MAY return a
choice response with this variant. Implies "trans".
Holtman & Mutz Experimental [Page 29]
RFC 2295 Transparent Content Negotiation March 1998
Servers SHOULD ignore all negotiate-directives they do not
understand. If the Negotiate header allows a choice between multiple
remote variant selection algorithms which are all supported by the
server, the server SHOULD use some internal precedence heuristics to
select the best algorithm.
8.5 TCN
The TCN response header is used by a server to signal that the
resource is transparently negotiated.
TCN = "TCN" ":" #( response-type
| server-side-override-directive
| tcn-extension )
response-type = "list" | "choice" | "adhoc"
server-side-override-directive = "re-choose" | "keep"
tcn-extension = token [ "=" ( token | quoted-string ) ]
If the resource is not transparently negotiated, a TCN header MUST
NOT be included in any response. If the resource is transparently
negotiated, a TCN header, which includes the response-type value of
the response, MUST be included in every response with a 2xx status
code or any 3xx status code, except 304, in which it MAY be included.
A TCN header MAY also be included, without a response-type value, in
other responses from transparently negotiated resources.
A server-side override directive MUST be included if the origin
server performed a server-side override when choosing the response.
If the directive is "re-choose", the server MUST include an
Alternates header with the variant bound to the negotiable resource
in the response, and user agent SHOULD use its internal variant
selection algorithm to choose, retrieve, and display the best variant
from this list. If the directive is "keep" the user agent SHOULD NOT
renegotiate on the response, but display it directly, or act on it
directly if it is a redirection response.
Clients SHOULD ignore all tcn-extensions they do not understand.
8.6 Variant-Vary
The Variant-Vary response header can be used in a choice response to
record any vary information which applies to the variant data (the
entity body combined with some of the entity headers) contained in
the response, rather than to the response as a whole.
Holtman & Mutz Experimental [Page 30]
RFC 2295 Transparent Content Negotiation March 1998
Variant-Vary = "Variant-Vary" ":" ( "*" | 1#field-name )
Use of the Variant-Vary header is discussed in section 10.2.
9 Cache validators
To allow for correct and efficient caching and revalidation of
negotiated responses, this specification extends the caching model of
HTTP/1.1 [1] in various ways.
This specification does not introduce a `variant-list-max-age'
directive which explicitly bounds the freshness lifetime of a cached
variant list, like the `max-age' Cache-Control directive bounds the
freshness lifetime of a cached response. However, this specification
does ensure that a variant list which is sent at a time T by the
origin server will never be re-used without revalidation by
semantically transparent caches after the time T+M. This M is the
maximum of all freshness lifetimes assigned (using max-age directives
or Expires headers) by the origin server to
a. the responses from the negotiable resource itself, and
b. the responses from its neighboring variant resources
If no freshness lifetimes are assigned by the origin server, M is the
maximum of the freshness lifetimes which were heuristically assigned
by all caches which can re-use the variant list.
9.1 Variant list validators
A variant list validator is an opaque value which acts as the cache
validator of a variant list bound to a negotiable resource.
variant-list-validator =
If two responses contain the same variant list validator, a cache can
treat the Alternates headers in these responses as equivalent (though
the headers themselves need not be identical).
9.2 Structured entity tags
A structured entity tag consists of a normal entity tag of which the
opaque string is extended with a semicolon followed by the text
(without the surrounding quotes) of a variant list validator:
Holtman & Mutz Experimental [Page 31]
RFC 2295 Transparent Content Negotiation March 1998
normal | variant list | structured
entity tag | validator | entity tag
-------------+----------------+-----------------
"etag" | "vlv" | "etag;vlv"
W/"etag" | "vlv" | W/"etag;vlv"
Note that a structured entity tag is itself also an entity tag. The
structured nature of the tag allows caching proxies capable of
transparent content negotiation to perform some optimizations defined
in section 10. When not performing such optimizations, a structured
tag SHOULD be treated as a single opaque value, according to the
general rules in HTTP/1.1. Examples of structured entity tags are:
"xyzzy;1234" W/"xyzzy;1234" "gonkxxxx;1234" "a;b;c;;1234"
In the last example, the normal entity tag is "a;b;c;" and the
variant list validator is "1234".
If a transparently negotiated response includes an entity tag, it
MUST be a structured entity tag. The variant list validator in the
structured tag MUST act as a validator for the variant list contained
in the Alternates header. The normal entity tag in the structured
tag MUST act as a validator of the entity body in the response and of
all entity headers except Alternates.
9.3 Assigning entity tags to variants
To allow for correct revalidation of transparently negotiated
responses by clients, origin servers SHOULD generate all normal
entity tags for the neighboring variant resources of the negotiable
resource in such a way that
1. the same tag is never used by two different variants,
unless this tag labels exactly the same entity on all occasions,
2. if one normal tag "X" is a prefix of another normal tag "XY",
then "Y" must never be a semicolon followed by a variant list
validator.
10 Content negotiation responses
If a request on a transparently negotiated resource yields a response
with a 2xx status code or any 3xx status code except 304, this
response MUST always be either a list response, a choice response, or
an adhoc response. These responses MUST always include a TCN header
which specifies their type. Transparently negotiated responses with
other status codes MAY also include a TCN header.
Holtman & Mutz Experimental [Page 32]
RFC 2295 Transparent Content Negotiation March 1998
The conditions under which the different content negotiation
responses may be sent are defined in section 12.1 for origin servers
and in section 13 for proxies.
After having constructed a list, choice, or adhoc response, a server
MAY process any If-No-Match or If-Range headers in the request
message and shorten the response to a 304 (Not Modified) or 206
(Partial Content) response, following the rules in the HTTP/1.1
specification [1]. In this case, the entity tag of the shortened
response will identify it indirectly as a list, choice, or adhoc
response.
10.1 List response
A list response returns the variant list of the negotiable resource,
but no variant data. It can be generated when the server does not
want to, or is not allowed to, return a particular best variant for
the request. If the user agent supports transparent content
negotiation, the list response will cause it to select a best variant
and retrieve it.
A list response MUST contain (besides the normal headers required by
HTTP) a TCN header which specifies the "list" response-type, the
Alternates header bound to the negotiable resource, a Vary header and
(unless it was a HEAD request) an entity body which allows the user
to manually select the best variant.
An example of a list response is
HTTP/1.1 300 Multiple Choices
Date: Tue, 11 Jun 1996 20:02:21 GMT
TCN: list
Alternates: {"paper.1" 0.9 {type text/html} {language en}},
{"paper.2" 0.7 {type text/html} {language fr}},
{"paper.3" 1.0 {type application/postscript}
{language en}}
Vary: negotiate, accept, accept-language
ETag: "blah;1234"
Cache-control: max-age=86400
Content-Type: text/html
Content-Length: 227
Multiple Choices:
Holtman & Mutz Experimental [Page 33]
RFC 2295 Transparent Content Negotiation March 1998
Note: A list response can have any status code, but the 300
(Multiple Choices) code is the most appropriate one for HTTP/1.1
clients. Some existing versions of HTTP/1.0 clients are known to
silently ignore 300 responses, instead of handling them according
to the HTTP/1.0 specification [2]. Servers should therefore be
careful in sending 300 responses to non-negotiating HTTP/1.0 user
agents, and in making these responses cacheable. The 200 (OK)
status code can be used instead.
The Vary header in the response SHOULD ensure correct handling by
plain HTTP/1.1 caching proxies. This header can either be
Vary: *
or a more elaborate header; see section 10.6.1.
Only the origin server may construct list responses. Depending on
the status code, a list response is cacheable unless indicated
otherwise.
According to the HTTP/1.1 specification [1], a user agent which does
not support transparent content negotiation will, when receiving a
list response with the 300 status code, display the entity body
included in the response. If the response contains a Location
header, however, the user agent MAY automatically redirect to this
location.
The handling of list responses by clients supporting transparent
content negotiation is described in sections 11.1 and 13.
10.2 Choice response
A choice response returns a representation of the best variant for
the request, and may also return the variant list of the negotiable
resource. It can be generated when the server has sufficient
information to be able to choose the best variant on behalf the user
agent, but may only be generated if this best variant is a
neighboring variant. For request from user agents which do not
support transparent content negotiation, a server may always generate
a choice response, provided that the variant returned is a
neighboring variant. The variant returned in a choice response need
not necessarily be listed in the variant list bound to the negotiable
resource.
Holtman & Mutz Experimental [Page 34]
RFC 2295 Transparent Content Negotiation March 1998
A choice response merges a normal HTTP response from the chosen
variant, a TCN header which specifies the "choice" response-type, and
a Content-Location header giving the location of the variant.
Depending on the status code, a choice response is cacheable unless
indicated otherwise.
Origin servers and proxy caches MUST construct choice responses with
the following algorithm (or any other algorithm which gives equal end
results for the client).
In this algorithm, `the current Alternates header' refers to the
Alternates header containing the variant list which was used to
choose the best variant, and `the current variant list validator'
refers to the validator of this list. Section 10.4 specifies how
these two items can be obtained by a proxy cache.
The algorithm consists of four steps.
1. Construct a HTTP request message on the best variant resource
by rewriting the request-URI and Host header (if appropriate) of
the received request message on the negotiable resource.
2. Generate a valid HTTP response message, but not one with the
304 (Not Modified) code, for the request message constructed in
step 1.
In a proxy cache, the response can be obtained from cache
memory, or by passing the constructed HTTP request towards the
origin server. If the request is passed on, the proxy MAY add,
modify, or delete If-None-Match and If-Range headers to optimize
the transaction with the upstream server.
Note: the proxy should be careful not to add entity tags of
non-neighboring variants to If-* (conditional) headers of the
request, as there are no global uniqueness requirements for
these tags.
3. Only in origin servers: check for an origin server
configuration error. If the HTTP response message generated in
step 2 contains a TCN header, then the best variant resource is
not a proper end point in the transparent negotiation process,
and a 506 (Variant Also Negotiates) error response message
SHOULD be generated instead of going to step 4.
4. Add a number of headers to the HTTP response message generated
in step 2.
Holtman & Mutz Experimental [Page 35]
RFC 2295 Transparent Content Negotiation March 1998
a. Add a TCN header which specifies the "choice"
response-type.
b. Add a Content-Location header giving the location of the
chosen variant. Delete any Content-Location header which was
already present.
Note: According to the HTTP/1.1 specification [1], if the
Content-Location header contains a relative URI, this URI
is relative to the URI in the Content-Base header, if
present, and relative to the request-URI if no Content-
Base header is present.
c. If any Vary headers are present in the response message
from step 2, add, for every Vary header, a Variant-Vary
header with a copy of the contents of this Vary header.
d. Delete any Alternates headers which are present in in the
response. Now, the current Alternates header MUST be added
if this is required by the Negotiate request header, or if
the server returns "re-choose" in the TCN response header.
Otherwise, the current Alternates header MAY be added.
Note: It is usually a good strategy to always add the
current Alternates header, unless it is very large
compared to the rest of the response.
e. Add a Vary header to ensure correct handling by plain
HTTP/1.1 caching proxies. This header can either be
Vary: *
or a more elaborate header, see section 10.6.
f. To ensure compatibility with HTTP/1.0 caching proxies which
do not recognize the Vary header, an Expires header with a
date in the past MAY be added. See section 10.7 for more
information.
g. If an ETag header is present in the response message from
step 2, then extend the entity tag in that header with the
current variant list validator, as specified in section 9.2.
Note: Step g. is required even if the variant list itself
is not added in step d.
h. Only in proxy caches: set the Age header of the response to
max( variant_age , alternates_age )
Holtman & Mutz Experimental [Page 36]
RFC 2295 Transparent Content Negotiation March 1998
where variant_age is the age of the variant response obtained
in step 2, calculated according to the rules in the HTTP/1.1
specification [1], and alternates_age is the age of the
Alternates header added in step d, calculated according to
the rules in section 10.4.
Note that a server can shorten the response produced by the above
algorithm to a 304 (Not Modified) response if an If-None-Match header
in the original request allows it. If this is the case, an
implementation of the above algorithm can avoid the unnecessary
internal construction of full response message in step 2, it need
only construct the parts which end up in the final 304 response. A
proxy cache which implements this optimization can sometimes generate
a legal 304 response even if it has not cached the variant data
itself.
An example of a choice response is:
HTTP/1.1 200 OK
Date: Tue, 11 Jun 1996 20:05:31 GMT
TCN: choice
Content-Type: text/html
Last-Modified: Mon, 10 Jun 1996 10:01:14 GMT
Content-Length: 5327
Cache-control: max-age=604800
Content-Location: paper.1
Alternates: {"paper.1" 0.9 {type text/html} {language en}},
{"paper.2" 0.7 {type text/html} {language fr}},
{"paper.3" 1.0 {type application/postscript}
{language en}}
Etag: "gonkyyyy;1234"
Vary: negotiate, accept, accept-language
Expires: Thu, 01 Jan 1980 00:00:00 GMT
A paper about ....
10.3 Adhoc response
An adhoc response can be sent by an origin server as an extreme
measure, to achieve compatibility with a non-negotiating or buggy
client if this compatibility cannot be achieved by sending a list or
choice response. There are very little requirements on the contents
of an adhoc response. An adhoc response MUST have a TCN header which
specifies the "adhoc" response-type, and a Vary header if the
response is cacheable. It MAY contain the Alternates header bound to
the negotiable resource.
Holtman & Mutz Experimental [Page 37]
RFC 2295 Transparent Content Negotiation March 1998
Any Vary header in the response SHOULD ensure correct handling by
plain HTTP/1.1 caching proxies. This header can either be
Vary: *
or a more elaborate header, see section 10.6.1. Depending on the
status code, an adhoc response is cacheable unless indicated
otherwise.
As an example of the use of an adhoc response, suppose that the
variant resource "redirect-to-blah" yields redirection (302)
responses. A choice response with this variant could look as
follows:
HTTP/1.1 302 Moved Temporarily
Date: Tue, 11 Jun 1996 20:02:28 GMT
TCN: choice
Content-location: redirect-to-blah
Location: http://blah.org/
Content-Type: text/html
Content-Length: 62
This document is available here.
Suppose that the server knows that the receiving user agent has a
bug, which causes it to crash on responses which contain both a
Content-Location and a Location header. The server could then work
around this bug by performing a server-side override and sending the
following adhoc response instead:
HTTP/1.1 302 Moved Temporarily
Date: Tue, 11 Jun 1996 20:02:28 GMT
TCN: adhoc, keep
Location: http://blah.org/
Content-Type: text/html
Content-Length: 62
This document is available here.
10.4 Reusing the Alternates header
If a proxy cache has available a negotiated response which is
cacheable, fresh, and has ETag and Alternates headers, then it MAY
extract the Alternates header and associated variant list validator
from the response, and reuse them (without unnecessary delay) to
Holtman & Mutz Experimental [Page 38]
RFC 2295 Transparent Content Negotiation March 1998
negotiate on behalf of the user agent (section 13) or to construct a
choice response (section 10.2). The age of the extracted Alternates
header is the age of the response from which it is extracted,
calculated according to the rules in the HTTP/1.1 specification [1].
10.5 Extracting a normal response from a choice response
If a proxy receives a choice response, it MAY extract and cache the
normal HTTP response contained therein. The normal response can be
extracted by taking a copy of the choice response and then deleting
any Content-Location, Alternates, and Vary headers, renaming any
Variant-Vary headers to Vary headers, and shortening the structured
entity tag in any ETag header to a normal entity tag.
This normal response MAY be cached (as a HTTP response to the variant
request as constructed in step 1. of section 10.2) and reused to
answer future direct requests on the variant resource, according to
the rules in the HTTP/1.1 specification [1].
Note: The caching of extracted responses can decrease the upstream
bandwidth usage with up to a factor 2, because two independent
HTTP/1.1 cache entries, one associated with the negotiable
resource URI and one with the variant URI, are created in the same
transaction. Without this optimization, both HTTP/1.1 cache
entries can only be created by transmitting the variant data
twice.
For security reasons (see section 14.2), an extracted normal response
MUST NEVER be cached if belongs to a non-neighboring variant
resource. If the choice response claims to contain data for a non-
neighboring variant resource, the proxy SHOULD reject the choice
response as a probable spoofing attempt.
10.6 Elaborate Vary headers
If a HTTP/1.1 [1] server can generate varying responses for a request
on some resource, then the server MUST include a Vary header in these
responses if they are cacheable. This Vary header is a signal to
HTTP/1.1 caches that something special is going on. It prevents the
caches from returning the currently chosen response for every future
request on the resource.
Servers engaging in transparent content negotiation will generate
varying responses. Therefore, cacheable list, choice, and adhoc
responses MUST always include a Vary header.
Holtman & Mutz Experimental [Page 39]
RFC 2295 Transparent Content Negotiation March 1998
The most simple Vary header which can be included is
Vary: *
This header leaves the way in which the response is selected by the
server completely unspecified.
A more elaborate Vary header MAY be used to allow for certain
optimizations in HTTP/1.1 caches which do not have specific
optimizations for transparent content negotiation, but which do cache
multiple variant responses for one resource. Such a more elaborate
Vary header lists all request headers which can be used by the server
when selecting a response for a request on the resource.
10.6.1 Construction of an elaborate Vary header
Origin servers can construct a more elaborate Vary header in the
following way. First, start with the header
Vary: negotiate
`negotiate' is always included because servers use the information in
the Negotiate header when choosing between a list, choice, or adhoc
response.
Then, if any of the following attributes is present in any variant
description in the Alternates header, add the corresponding header
name to the Vary header
attribute | header name to add
-----------+---------------------
type | accept
charset | accept-charset
language | accept-language
features | accept-features
The Vary header constructed in this way specifies the response
variation which can be caused by the use of a variant selection
algorithm in proxies. If the origin server will in some cases, for
example if contacted by a non-negotiating user agent, use a custom
negotiation algorithm which takes additional headers into account,
these names of these headers SHOULD also be added to the Vary header.
Holtman & Mutz Experimental [Page 40]
RFC 2295 Transparent Content Negotiation March 1998
10.6.2 Caching of an elaborate Vary header
A proxy cache cannot construct an elaborate vary header using the
method above, because this method requires exact knowledge of any
custom algorithms present in the origin server. However, when
extracting an Alternates header from a response (section 10.4) caches
MAY also extract the Vary header in the response, and reuse it along
with the Alternates header. A clean Vary header can however only be
extracted if the variant does not vary itself, i.e. if a Variant-Vary
header is absent.
10.7 Adding an Expires header for HTTP/1.0 compatibility
To ensure compatibility with HTTP/1.0 caching proxies which do not
recognize the Vary header, an Expires header with a date in the past
can be added to the response, for example
Expires: Thu, 01 Jan 1980 00:00:00 GMT
If this is done by an origin server, the server SHOULD usually also
include a Cache-Control header for the benefit of HTTP/1.1 caches,
for example
Cache-Control: max-age=604800
which overrides the freshness lifetime of zero seconds specified by
the included Expires header.
Note: This specification only claims downwards compatibility with
the HTTP/1.0 proxy caches which implement the HTTP/1.0
specification [2]. Some legacy proxy caches which return the
HTTP/1.0 protocol version number do not honor the HTTP/1.0 Expires
header as specified in [2]. Methods for achieving compatibility
with such proxy caches are beyond the scope of this specification.
10.8 Negotiation on content encoding
Negotiation on the content encoding of a response is orthogonal to
transparent content negotiation. The rules for when a content
encoding may be applied are the same as in HTTP/1.1: servers MAY
content-encode responses that are the result of transparent content
negotiation whenever an Accept-Encoding header in the request allows
it. When negotiating on the content encoding of a cacheable
response, servers MUST add the accept-encoding header name to the
Vary header of the response, or add `Vary: *'.
Holtman & Mutz Experimental [Page 41]
RFC 2295 Transparent Content Negotiation March 1998
Servers SHOULD always be able to provide unencoded versions of every
transparently negotiated response. This means in particular that
every variant in the variant list SHOULD at least be available in an
unencoded form.
Like HTTP/1.1, this specification allows proxies to encode or decode
relayed or cached responses on the fly, unless explicitly forbidden
by a Cache-Control directive. The encoded or decoded response still
contains the same variant as far as transparent content negotiation
is concerned. Note that HTTP/1.1 requires proxies to add a Warning
header if the encoding of a response is changed.
11 User agent support for transparent negotiation
This section specifies the requirements a user agent needs to satisfy
in order to support transparent negotiation. If the user agent
contains an internal cache, this cache MUST conform to the rules for
proxy caches in section 13.
11.1 Handling of responses
If a list response is received when a resource is accessed, the user
agent MUST be able to automatically choose, retrieve, and display the
best variant, or display an error message if none of the variants are
acceptable.
If a choice response is received when a resource is accessed, the
usual action is to automatically display the enclosed entity.
However, if a remote variant selection algorithm which was enabled
could have made a choice different from the choice the local
algorithm would make, the user agent MAY apply its local algorithm to
any variant list in the response, and automatically retrieve and
display another variant if the local algorithm makes an other choice.
When receiving a choice response, a user agent SHOULD check if
variant resource is a neighboring variant resource of the negotiable
resource. If this is not the case, the user agent SHOULD reject the
choice response as a probable spoofing attempt and display an error
message, for example by internally replacing the choice response with
a 502 (bad gateway) response.
11.2 Presentation of a transparently negotiated resource
If the user agent is displaying a variant which is not an embedded or
inlined object and which is the result of transparent content
negotiation, the following requirements apply.
Holtman & Mutz Experimental [Page 42]
RFC 2295 Transparent Content Negotiation March 1998
1. The user agent SHOULD allow the user to review a list of all
variants bound to the negotiable resource, and to manually
retrieve another variant if desired. There are two general ways
of providing such a list. First, the information in the
Alternates header of the negotiable resource could be used to
make an annotated menu of variants. Second, the entity included
in a list response of the negotiable resource could be displayed.
Note that a list response can be obtained by doing a GET request
which only has the "trans" directive in the Negotiate header.
2. The user agent SHOULD make available though its user interface
some indication that the resource being displayed is a negotiated
resource instead of a plain resource. It SHOULD also allow the
user to examine the variant list included in the Alternates
header. Such a notification and review mechanism is needed
because of privacy considerations, see section 14.1.
3. If the user agent shows the URI of the displayed information to
the user, it SHOULD be the negotiable resource URI, not the
variant URI that is shown. This encourages third parties, who
want to refer to the displayed information in their own
documents, to make a hyperlink to the negotiable resource as a
whole, rather than to the variant resource which happens to be
shown. Such correct linking is vital for the interoperability of
content across sites. The user agent SHOULD however also provide
a means for reviewing the URI of the particular variant which is
currently being displayed.
4. Similarly, if the user agent stores a reference to the
displayed information for future use, for example in a hotlist,
it SHOULD store the negotiable resource URI, not the variant URI.
It is encouraged, but not required, that some of the above
functionality is also made available for inlined or embedded objects,
and when a variant which was selected manually is being displayed.
12 Origin server support for transparent negotiation
12.1 Requirements
To implement transparent negotiation on a resource, the origin server
MUST be able to send a list response when getting a GET request on
the resource. It SHOULD also be able to send appropriate list
responses for HEAD requests. When getting a request on a
transparently negotiable resource, the origin server MUST NEVER
return a response with a 2xx status code or any 3xx status code,
except 304, which is not a list, choice, or adhoc response.
Holtman & Mutz Experimental [Page 43]
RFC 2295 Transparent Content Negotiation March 1998
If the request includes a Negotiate header with a "vlist" or "trans"
directive, but without any directive which allows the server to
select a best variant, a list response MUST ALWAYS be sent, except
when the server is performing a server-side override for bug
compatibility. If the request includes a Negotiate header with a
"vlist" or "guess-small" directive, an Alternates header with the
variant list bound to the negotiable resource MUST ALWAYS be sent in
any list, choice, or adhoc response, except when the server is
performing a server-side override for bug compatibility.
If the Negotiate header allows it, the origin server MAY run a remote
variant selection algorithm. If the algorithm has sufficient
information to choose a best variant, and if the best variant is a
neighboring variant, the origin server MAY return a choice response
with this variant.
When getting a request on a transparently negotiable resource from a
user agent which does not support transparent content negotiation,
the origin server MAY use a custom algorithm to select between
sending a list, choice, or adhoc response.
The following table summarizes the rules above.
|Req on |Usr agnt|server- | Response may be: |
|trans neg|capable |side +------+------+------+------+------+
|resource?|of TCN? |override?|list |choice|adhoc |normal|error |
+---------+--------+---------+------+------+------+------+------+
| Yes | Yes | No |always|smt(*)|never |never |always|
+---------+--------+---------+------+------+------+------+------+
| Yes | Yes | Yes |always|always|always|never |always|
+---------+--------+---------+------+------+------+------+------+
| Yes | No | - |always|always|always|never |always|
+---------+--------+---------+------+------+------+------+------+
| No | - | - |never |never |never |always|always|
+---------+--------+---------+------+------+------+------+------+
(*) sometimes, when allowed by the Negotiate request header
Negotiability is a binary property: a resource is either
transparently negotiated, or it is not. Origin servers SHOULD NOT
vary the negotiability of a resource, or the variant list bound to
that resource, based on the request headers which are received. The
variant list and the property of being negotiated MAY however change
through time. The Cache-Control header can be used to control the
propagation of such time-dependent changes through caches.
It is the responsibility of the author of the negotiable resource to
ensure that all resources in the variant list serve the intended
content, and that the variant resources do not engage in transparent
Holtman & Mutz Experimental [Page 44]
RFC 2295 Transparent Content Negotiation March 1998
content negotiation themselves.
12.2 Negotiation on transactions other than GET and HEAD
If a resource is transparently negotiable, this only has an impact on
the GET and HEAD transactions on the resource. It is not possible
(under this specification) to do transparent content negotiation on
the direct result of a POST request.
However, a POST request can return an unnegotiated 303 (See Other)
response which causes the user agent to do a GET request on a second
resource. This second resource could then use transparent content
negotiation to return an appropriate final response. The figure
below illustrates this.
Server ______ proxy ______ proxy ______ user
x.org cache cache agent
< -------------------------------------
| POST http://x.org/cgi/submit
| |